4
Safety Instructions
This User Manual is provided for your convenience. Please read this instruction manual
thoroughly before using your new printer, as the precautions, information, and tips
contained within can significantly help you avoid the risk of improper product setup and
usage.
Do not place the printer in vibrating or unstable environments, as machine shaking
can affect print quality.
Refrain from touching the nozzle and heated bed during printing to prevent burns
and personal injury.
After printing, use residual nozzle temperature for filament cleaning. Avoid direct
contact with the hot nozzle.
Perform frequent product maintenance, cleaning the printer body with a dry cloth
when powered off to remove dust and residues.
Be cautious of high-speed moving parts to prevent hand injuries.
Ensure children are supervised by adults while using the machine to prevent
personal injury.
Cut off power directly in case of emergencies.
Before levelling, homing, or printing, ensure the proper placement of the golden PEI
on the platform to prevent nozzle collisions and damage.
Properly ground the machine during operation to reduce the risk of electrical shock.
If the machine is not in use for an extended period, turn it off and unplug the power
cord.
Support Information
For any questions or issues not addressed in this manual, please feel free to contact us
directly through our customer support email address: 3dp@elegoo.com. The ELEGOO team
is always available to provide you with quality service.
Additionally, you can find supplemental information for operating your new printer through
the following sources:
The USB Drive: The digital files on this drive include a copy of this manual and all
required software.
The ELEGOO official website:
www.elegoo.com, where you can find additional
information regarding equipment operation, contact details, and more.
To Next Page