Need help?Do you have a question about the Elektro-Automatik PS 9000 T Series and is the answer not in the manual?
General| Output Current | 0-60 A |
|---|---|
| Input Voltage | 400 V AC |
| Interface | USB, Ethernet |
| Efficiency | 93% |
| Protection Features | OVP, OCP, OTP |
| Display | TFT Touch Panel |
| Cooling | Temperature controlled fan |
Safety notices, user/operator responsibilities, and user requirements.
Steps for the first start-up and initial setup of the device after installation.
Essential safety measures for operating personnel to prevent injury.
Explains different operational modes like constant voltage, current, and power regulation.
Overview of device alarms like Power Fail, Overtemperature, Overvoltage, Overcurrent, and Overpower.
Guides on switching the device on/off, menu configuration, and value adjustment.
Detailed steps for configuring device settings through the menu system.
How to acknowledge device alarms and configure alarm thresholds.
Explains the calibration process, preparation, and procedure for ensuring output accuracy.
To Next Page