Elektro-Automatik PS 9000 T Series User Manual

Page 61
EA Elektro-Automatik GmbH
Helmholtzstr. 31-33 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
www.elektroautomatik.de
ea1974@elektroautomatik.de
PS 9000 T Series
4.3.3.3 Save and exit
After calibration you may furthermore enter the current date as “calibration date” by tapping in the
selection screen and enter the date in format YYYY / MM / DD.
Last but not least save the calibration data permanently by tapping .
Leaving the calibration selection menu without tapping “Save and exit” will discard calibration
data and the procedure would have to be repeated!
5. Contact and support
5.1 Repairs
Repairs, if not otherwise arranged between supplier and customer, will be carried out by the manufacturer. For this
thedevicemustgenerallybereturnedtothemanufacturer.NoRMAnumberisneeded.Itissufcienttopackage
the equipment adequately and send it, together with a detailed description of the fault and, if still under guarantee,
a copy of the invoice, to the address below.
5.2 Contact options
Questions or problems with operation of the device, use of optional components, with the documentation or soft-
ware, can be addressed to technical support either by telephone or e-Mail.
Address e-Mail Telephone
EA Elektro-Automatik GmbH
Helmholtzstr. 31-33
41747 Viersen
Germany
Support:
support@elektroautomatik.de
All other issues:
ea1974@elektroautomatik.de
Switchboard: +49 2162 / 37850
Support: +49 2162 / 378566

Elektro-Automatik PS 9000 T Series Specifications

General

Brand	Elektro-Automatik
Model	PS 9000 T Series
Category	Power Supply
Language	English