14
Remote Control Setup
1. Open the cover.
2. Use two AAA size batteries.When inserting the batteries, make sure correct polarities “+”and “-”
marks
on the batteries line up correctly with compartment markings .
3. Replace the battery cover.
To prevent battery leakage which may result in bodily injury or damage to the remote:
1. Install all batteries correctly, and as marked on the remote control.
2. Do not mix old and new batteries, and do not mix alkaline, standard (carbon-zinc) or rechargeable
(ni-cad, ni-mh, etc.) Batteries.
3. Remove batteries when the remote is not used for a long period of time.
REMOTE CONTROL
To Next Page
Loading...
