Chapter 1 Introduction
The scanner uses the class leading chip with intelligent image reading technology, and it mainly uses
for image-based 2D scanner.
The scanner can read all kinds of 1D barcodes and standard 2D barcodes (various versions of PDF417,
QR code, and Data matrix) can easily scan paper, plastic cards, LCD and other barcode printed media.
Its fully integrated design makes it easy to embed in a wide range of product applications.
About Manual
This guide mainly provides various functional setup instructions for the scanner. By scanning the setup
barcodes in this guide, you can change the functional parameters of the scanner, such as
communication interface parameters, scanning mode, prompt mode, data processing and output, etc.
The scanner provides parameter configurations that are suitable for most used functions at the
factory. And in most cases users can put them into use without making adjustment.
Barcode Read
In manual read mode, the procedure for scanning barcodes is as follows:
(1) Make sure that the scanner, data cable, data receiving host, and power supply are properly
connected and turned on.
(2) Press the trigger to activate the light.
To Next Page
Loading...
