Command Programming
In this mode, scanner needs the host to trigger and decode the barcode. The scanner can set the
length of the reading time. The reading code time can be set to 0.1~9.9s. When it be set to 0 that
indicates no wait. Please refer to chapter 7 of the setting method.
Scan Screen Mode（Optimize settings for screen barcodes only）
OFF* ON
Offline Storage Mode (Only Available for Bluetooth Mode)
⚫ Offline storage
Enable Disable
⚫ Send the offline storage data
⚫ Clear the offline data
To Next Page
Loading...
Need help?
General
