USB Virtual Serial Port
When the scanner uses a USB communication interface, but the host application uses serial
communication to receive data, you can set the scanner to the USB virtual serial port. This function
requires that be installed the appropriate driver on the host.
USB Virtual Serial Port Setting
HID-POS Interface
As an auxiliary interface, HID POS can send commands to the scanner through the USB HID POS
interface. It can also connect the same Barcode Scanner as a USB serial device, and then receive data
and send commands through the virtual port.
HID-POS settings
Bluetooth Interface
In this mode, the scanner outputs data to the host in Bluetooth transmission mode.
Bluetooth transmission mode settings
To Next Page
Loading...
Need help?
General
