How to fix Element RW873 Printer when LED is not lit and it's not working?
If the LED indicator is not lit and the Element Printer is not working, it could be due to several reasons: * The printer might not be receiving power. Ensure the power supply is properly connected. * The printer might be off. Turn on the printer. * In case of broken circuit board, contact with the dealer.
What to do if my Element Printer has a paper jam?
If your Element Printer has a paper jam, it's likely due to paper strike. To resolve this, open the printer cover, check the paper path, and remove any jammed paper.
Why is my Element RW873 printing blurred or with spots?
Blurred printing or spots on your Element Printer can be caused by: 1. Incorrect roll paper installation. Check if the roll paper is installed correctly. 2. Using unqualified roll paper. Use recommended thermal roll paper. 3. A dirty thermal head or print roller. Clean the thermal head or print roller. 4. Low print density. Increase the print density level.
What to do if the Paper Error LED is always on and the Element RW873 Printer beeps?
If the Paper Error LED is constantly on and the Element Printer is beeping, it indicates that the printer is out of paper. Reload the roll paper to resolve this issue.
Why is the Error LED blinking and beeper alarming on my Element RW873?
If the Error LED is blinking and the Element Printer is beeping, it could be due to: * The thermal print head overheating. Turn the printer off and resume printing when it cools down. * Overvoltage or Low-voltage. Print with specified voltage.
How to fix missing vertical print words on Element Printer?
Missing vertical print words on your Element Printer can be caused by: * A dirty thermal head or print roller. Clean the thermal head or print roller. * If cleaning doesn't help, the thermal head might be damaged. Contact your dealer for assistance.
What does it mean when the Error LED is always on and the Element Printer beeper alarms?
If the Error LED is always on and the Element Printer is beeping, it means that the printer cover is open. Close the printer cover to resolve this issue.
Why is there a colored stripe on the paper from my Element RW873 Printer?
A colored stripe on the paper from your Element Printer is likely due to the paper near end. Try reinstalling the roll paper to fix this.
Why is the Paper LED always on in my Element Printer?
If the Paper LED is always on in your Element Printer, it indicates that the roll paper is near its end. The printer can still work normally.
To Next Page
General
