Notes：
► Please only use the power adapter are recommended by supplied or equivalent
products;
► When disconnecting the AC adapter plug, handhold plug connector housing, to
avoid the pulling on the cable in force;
► Avoid drag the power adapter cable, otherwise it will damage the cables, causing
fire and shock;
► Avoid put power adapter around a heating device, otherwise the cable may melt,
causing fire and shock;
► If you do not use the printer in a long time, disconnect the power supply of printer
power adapter.
4.4 Connecting the Interface Cable
1) Make sure the printer's power switch is turned off;
2) Put the interface cable into the matched interface and fixed with screws (or spring)
on the plug;
3) Connect the other end of the interface cable to the host.
To Next Page
Loading...
