4.8 Printer Self Testing
1) Make sure the printer has been installed paper roll and turn off the top cover;
2) Press on FEED button and turn on power switch, the printer can print out
configuration information and the prompt line “If you want to continue SELF-TEST
printing, please press FEED button”.
Press FEED quickly, the printer will print the character test sample and end of self-test
page printing process.
4.9 Installation of Windows Driver
1. Install the Windows Driver program. (Please refer to the Windows Driver Manual)
2. Please set the “Interface” as the type you use.
3. Use the Windows Driver Program to print out the “Print Test Page”.
To Next Page
Loading...
