IMPORTANT SAFETY INSTRUCTIONS
1. Safety warnings
1) Warnings: The print head will become very hot during printing; avoid contact
with the print head after printing has finished.
2) Warnings: Do not touch the printer head and connector in case static damage
the printer head.
2. Instructions
Read the following instructions thoroughly before starting up your printer.
1) Place the printer on a solid and even base so that it cannot fall.
2) Leave enough space around printer for operation and maintenance.
3) Keep all liquids away from the printer.
4) Do not expose the printer to high temperatures, direct sunlight or dust.
5) Protect the printer from shock, impact and vibration.
6) Ensure the printer is connected to a socket with the correct mains voltage.
7) Switch off the printer power supply when won’t use it for a long time.
8) Do not printing when there is no paper, or it will damage printer head.
9) To ensure the printing quality and reliability, suggest use the same quality or
recommend paper supplier.
10) Please switch off the power supply when connect/disconnect all the ports or it
will cause damage to the printer control circuit.
11) Never carry out maintenance or repair work yourself. Always contact a
qualified service technician.
12) Keep this Operator’s Manual in a place which is always easily accessible.
To Next Page
Loading...
