● Long Beeping After cutting:
① Disable: there is no sound after cutting
② Use printer buzzer (The beeping time, times and interval time can be set for
what you want, such as 2 milliseconds, 3 milliseconds or 4 milliseconds, etc.):
The following setting is set as an example:
When cutting one piece of paper each time, the printer will emit the “Beep” for
one time, and the beeping time is two milliseconds and beeping interval is three
milliseconds.
● Buzzer Volume:
Note:
0: very low
1: low
2: standard
3: loud
To Next Page
Loading...
