46
OPERATING the FIREPLACE
Element4 Gas Fireplaces EuropeanHome.com
THE FIRST FIRE
When the replace is rst heated, an odor may be given o by the hot metal. This is normal and is a result of the ‘burn o’ of the
lubricants and sealants used when manufacturing the replace. We recommend that you open the nearby windows for extra
ventilation and then operate the replace for at least four hours.
When the glass is cold, some condensation may appear on the glass after lighting the replace. This is normal and the
condensation will disappear as the glass warms.
During this rst re, examine the ame for appearance and quality. Examine the burner media for sooting. The ames should look
like those shown below.
After this burn-o period, turn o the replace and let it cool completely to room temperature and clean both sides of the glass
and the interior panels as described in the MAINTENANCE section.
Since it is a metal replace, the heat-up and cool-down cycles may produce some noises caused by the expansion and contraction
of these metals. The premium materials and build quality of your replace will keep these sounds to a minimum.
To see an Element4 replace starting and running normally
please visit the link below.
WWW.EUROPEANHOME.COM/RESOURCES/VIDEOS/
To Next Page
Loading...
