Need help?Do you have a question about the Elite Miracle-One and is the answer not in the manual?
General| Voltage | 24V DC |
|---|---|
| Safety Features | Manual Release |
| Maximum Gate Weight | 800 kg |
| Maximum Gate Width | 6 meters |
| Control Type | Remote control |
General installation rules for gate operators, focusing on safety and compliance.
Specifies requirements for non-contact and contact sensors for entrapment protection.
Critical safety warnings and instructions for operating the gate operator to prevent injury or death.
Defines gate operators by class (I, II, III, IV) based on usage.
Specifies that the Miracle-1 is exclusively for vehicular gate applications.
Illustrates and lists critical "DO NOT" installation points to prevent damage or failure.
Reiterates crucial safety advice for user operation and maintenance of the gate.
Details mounting specifications and diagrams for installing the operator with the gate opening inwards.
Details mounting specifications and diagrams for installing the operator with the gate opening outwards.
Covers initial mounting steps 1-3: cover removal, unlocking, and positioning.
Covers mounting steps 4-7: tack welding, final welding, and bracket attachment.
Covers mounting steps 8-10: leveling, locking the operator, and preparing for connections.
Covers steps 11-12 for adjusting limit switches and reinstalling the operator cover.
Details the wiring for a solenoid lock when the gate opens inwards.
Details the wiring for a magnetic lock for inward opening gates.
Details the wiring for a solenoid lock when the gate opens outwards.
Details the wiring for a magnetic lock for outward opening gates.
Explains the close delay option for master/slave installations with overlapping gates.
Guides on checking and replacing fuses for both master/slave and single gate operator systems.
Addresses issues where the gate fails to close, focusing on the radio receiver.
Addresses issues where the gate fails to open, focusing on the remote control and radio receiver.
Explains common reasons for the alarm LED to be illuminated, indicating operational issues.
Details the physical and operational specifications of the gate operator.
Details the electrical characteristics, system operation, and input/output functions.
To Next Page
