Product description
BA_Elmasolvex_SE_EN_Vers. 03.2018 © Elma Schmidbauer GmbH
3 Product description
The Elmasolvex®SE cleaning machine is a manual cleaning
machine for cleaning watch movements and other mechanical
precision parts with aqueous solution and solvent based
cleaning and rinsing media.
Solvent cleaning for media with flashpoint >= 23 °C,
e.g.: elma WF pro – 3x elma suprol pro – drying.
Semi-aqueous combination process:
e.g. elma 1:9 – deionised water – 2x elma suprol pro – drying.
With innovative product characteristics, the Elmasolvex®SE
cleaning machine provides a high standard of cleanliness with
certified compliance with the EU regulations for machine and
explosion safety for cleaning with flammable solvents (see
Declaration of conformity, Chapter 3.5).
3.1 How it Works
After manual preselection of the time and speed per process
step, the drive unit with the cleaning basket / movement holder
is moved one after the other into the different positions
(cleaning / rinsing, spinning, drying).
The drive unit and control panel can be engaged in 3 vertical
(cleaning / rinsing position – spinning position – change
position) and 5 horizontal positions (above media tanks and
drying chamber).
The covers of the media tanks can be placed in the receptacles
provided for them in the base during the respective use of the
media tanks.
3.2 Product Features
• Solvent-based, water-free 4-stage cleaning and rinsing,
also with flammable solvents for intended operation in
accordance with the relevant EU safety regulations.
Safety concept tested by TÜV Rheinland.
• Cleaning and rinsing 3 times.
• Gentle drying with hot air fan, supported if necessary by
previous spinning up to 1200 rpm.
• Discharge of the solvent vapours via exhaust air
connection possible.
• Suitable for solvents with flashpoint >= 23 °C and
ignition temperature >= 200 °C.
To Next Page
Loading...
