Elmo Document Camera - Using Image Mate Software; For More Information

Elmo 10/08 Page 4
Using Image Mate Software
• Connect the Elmo’s USB cable to the Elmo and your computer.
• Launch Image Mate from the dock.
• Click the Still Capture button to take a picture.
• Click the Zoom In button to enlarge.
• Click the Save button to save an image.
For More Information
A manual is included with the Elmo, or you can download your own manual at:
http://www.elmousa.com/files/DigDocCameras/TT-02s/tt02s_i.pdf
Click File > Save to save a copy of the manual to your desktop.
You’ll find a manual for the Image Mate software at:
http://www.elmousa.com/presentation/mac/UtilitySoftware(VHM)forMac.pdf
Click File > Save to save a copy of the manual to your desktop.