Elmo MX-1 - SHOOTING IMAGES; ADJUSTING THE SIZE; ADJUSTING THE BRIGHTNESS; ADJUSTING THE FOCUS

日
本
語
English
Français
Deutsch
The maximum zoom ration is 8x (digital zoom).
The image quality will be degraded when using the digital zoom.
➍ SHOOTING IMAGES
■ADJUSTING THE SIZE
The image size can be adjusted using [ / ] buttons on the Operating panel in the
Zoom mode (LED: blue/green). If the MX-1 is in the Brightness adjustment mode (LED:
purple), change the mode to the Zoom mode.
■ADJUSTING THE BRIGHTNESS
The brightness of the image can be adjusted using [ / ] buttons on the Operating
panel in the Brightness adjustment mode (LED: purple). The brightness does not change
automatically according to the brightness of the shooting environment. If the MX-1 is in the
Zoom mode (LED: blue/green), change the mode to the Brightness adjustment mode.
■ADJUSTIMG THE FOCUS
Press the button on the Operating panel to automatically focus on an object.
■PAUSING THE IMAGE
Press the button to pause the camera image. Press the button again to restart. (This
function can be used in both the Zoom mode and Brightness adjustment mode.)
■ROTATING THE IMAGE
The image rotates by 180°by pressing the button on the Operating panel.
(This function can be used in both the Zoom mode and Brightness adjustment mode.)
■TURNING THE LED LIGHTING ON/OFF
The LED lighting can be turned ON/OFF by pressing button on the Operating panel in
the Zoom mode (LED: blue/green). If the MX-1 is in the Brightness adjustment mode (LED:
purple), change the mode to the Zoom mode.
Caution
• To take shots of people, turn the LED lighting OFF.
• Make sure that the light from the LED lighting does not shine directly into your eyes.
• This product is equipped with a high-brightness LED. You can safely use it to light up
the object. The brightness will gradually decrease with long-term use. This is not a
malfunction but a characteristic of the LED.
• Do not touch the LED lighting while it is on as it may become very hot.
P.33
Note
P.33
P.33
P.33
P.33
P.33
40