ELNA 2000 Series User Manual

Drawing Up the Bobbin Thread
1. Raise the presser foot and hold the needle
thread lightly with your left hand.
2. Turn the flywheel towards you to lower needle
into machine. Continue turning until the needle
has risen and the take-up lever is at its highest
position.
Pull up the needle thread together with a loop of
bobbin thread.
3. Slide 10 cm (4”) of both threads to the back un-
der the presser foot.
16
1
2
3

ELNA 2000 Series Specifications

General

Drop Feed	Yes
Free Arm	Yes
Adjustable Stitch Length	Yes
Adjustable Stitch Width	Yes
Stitch Options	Decorative
Presser Feet	Buttonhole Foot, Zipper Foot