ELNA Cl.11 User Manual

Drawing up the Lower Thread
Fig.32
Hold the upper thread between the left index
finger and the edge of the needle plate.
Place your hand on the top of the flywheel, turn it
forone full turn -towards you- so thatthe thread
take-up lever is lowered and then raised com-
pletely to its highest position.
The lower thread then is drawn up automatically .
Free it by hand comp letely.
Fig.33
Make sure
that the lower thread crosses the bobbin
correctly.
Fig.34
Close the rotary hook cover, pull both threads
about 6 inches towards the rear and pass them
under the presser foot.
Place the material beneath the presser foot and
lower the presser foot lever. Never run a threaded
machine without any material under the pres-
ser foot.
The two threads should be held back while
sewing the first two or three stitches, every
time you start sewing.

ELNA Cl.11 Specifications

General

Brand	ELNA
Model	Cl.11
Category	Sewing Machine
Language	English