ELNA Cl.11 User Manual

Fig.92
Putting in Elastics
Place the elastic on the material as shown in the
illustration. In this way, it is not necessary to pull
the elastic, in order to stretch it . You just sew
slowly,
feeding enough material under the foot, so
that it gathers. This stitching remains supple
and can be stretched.
Fig.93
Shell Stitch
® 1-2
It is mainly sewn on the bias. Every sixth stitch
should be made outside the material. Then sew
or put the bias in place, depending on the kind of
work which is being done. Also suitable for sewing
on jersey material.
Fig. 94
Blind Stitch
~ eD 1-4 ® 1-4
• Form the hem: I, (a =
wrong side of fabric).
• Fold it back, underneath
the fabric: II.
•
Place it under the presser foot as shown in
fig.
94.
• Sew the hem, making sure that only the wide
stitches
to the left enter into the fold.
When the work is finished, unfold it and press.
If you often sew- this stitch, the special blind stitch
foot with guide is recommended-see extra ac-
cessories page 25.
Fig.95
Other Uses of the Blind Stitch and the Shell
Stitch
® 1!1,-2
A strip of bias is first stitched with a shell stitch.
It is then appliqued to lingerie, for example, with
a blind stitch, and
this stitch is also used to ap-
plique a ribbon as border. It thus becomes a de-
lightful decorative stitch.
~----- ---------~-

ELNA Cl.11 Specifications

General

Brand	ELNA
Model	Cl.11
Category	Sewing Machine
Language	English