ELNA Zig Zag Cl. 21 - Unpacking and Setup; Opening the Case and Removing Components

Preparing Your ELNA
Opening the Case and Unpacking
for the free-arm ELNA
Fig.3
Remove the 4 screws at the bottom.
Keep them in the accessory box for use again it
necessary
(important for shipping).
Fig.4
Open the flap.
Fig.5
Remove the cover.
Take
out the foot control.
Fig.6
Take out the machine,
the accessory box.
Fig.l
Work Table
To increase the working surface, use the cover as
a work table.
e