ELNA Zig Zag Cl. 21 User Manual

r
Fig.tl-18
Quick Change of the Presser Feet-without a
screwdriver.
For
all accessories, whether standard or extra
raise the needle bar and the presser bar. Turn out
the wings of the clamping · screw and loosen it.
Fasten the
foot. Tighten the clamping screw, turn
in the wings, fig.18.
Fig.19
N. B. The darning foot is fastened from the rear,
the lever
of the foot passing behind the needle
clamp stud.
·
Make sure to lower the presser foot lever before
starting to darn.
Threads
The use of good quality dull or mercerized thread
is preferable.
A dry
thre ad becomes brittle.lt regains its strength
when placed near an open window overnight.
Fig.20
For darning, use left twist thread (stronger).
Choice of Threads and Needles
Choose the thread according to the kind of work
and material used, the needle according to the
thread: _ darning, sewing or embroidery thread
according to the fineness, durab ility and the ap-
pearance
to be given to the sewing work.
Th reads
Nee d les
Male rials
System
Colto n
I
Si lk
I
Synthetic
13 0/705 H
F ibres
1 5x 1
Shee r
120- 1 00* sewing
sewi ng
70
10
- --
Used (darning)
da rni ng
da rn ing
darn i ng
70
1 20- 1 00*
10
--- - - -
O rd in ary 1 00 -6 0* sew in g sew ing
80
12
I
---
Med i um and
I
80-40* sew ing
sew i ng
80-90
h eavy we i ghts
1 2- 14
•siz e m ay ch ange dep en din g on the country

ELNA Zig Zag Cl. 21 Specifications

General

Brand	ELNA
Model	Zig Zag Cl. 21
Category	Sewing Machine
Language	English