ELNA Zig Zag Cl. 21 User Manual

Accessories
The accessory box contains the following standard
accessories:
1 presser foot (already on the machine) (8)
1 darning foot (9 a)
1· darning plate
1 adjustable zipper foot (9 b)
5 bobbins
1 assortment of 5 needles
1 screwdriver
1 cleaning brush
1 empty
oiler
1 ELNA · oil refil!
1 needle threader
For ELNA Zig Zag and ELNA Special
only:
1 darning and button plate instead of darning plate
1 cording-buttonhole foot (10)
1 buttonhole knife
How to use the accessories is explained from page
13.
Fig.11
Electrical Controls
Check the voltage on the switch plate. Make sure
that the voltage is the same as that indicated on
the light bulbs in your home. If this is not the case,
do
not plug in the machine, but get in touch with
the ELNA service. Do not go by the markings on
the
plugs.
Electric Foot Control and Cord
Plug these in as shown in fig.11 .
Electronic foot control
See extra accessories page 25.
Starting the Machine
The more you press the foot control pedal down,
the faster the machine runs.
Fig. 12
Sewing Light
The switch is on the switch plate.
To replace the bulb: First of all, pull out the plug.
Press with the screwdriver to make the lamp come
out.
Bayonet
socket: push in, turn and remove the bulb.
0
/

ELNA Zig Zag Cl. 21 Specifications

General

Brand	ELNA
Model	Zig Zag Cl. 21
Category	Sewing Machine
Language	English