5.9 evaporator fan management 25
5.10 lights management 26
5.11 statistics 26
5.12 alarms 26
6 self-learning 28
6.1 what is the self-learning matrix? 29
6.2 how a 7-day learning period works 29
6.3 how a 1-day learning period works 31
6.4 how the self-learning matrix updates after the learning period 33
6.5 how ems controllers switch between the ready and saving mode 33
7 user guide 35
7.1 power-up sequence 35
7.2 display codes 35
7.3 how to access the menu (example) 36
7.4 how to view the ems55advanced parameter settings (PS) GDCfirmware 37
7.5 how to view the ems55advanced parameter settings (PS) OFCfirmware 39
7.6 how to run the test routine (tst) 40
7.7 how to perform a half reset (Hr) 42
7.8 how to view the last three alarms (FLt) 43
7.9 how to view statistics 43
8 troubleshooting 46
8.1 how to check that ems controllers are working correctly 46
8.2 how to troubleshoot condenser high temperature (Ht) alarms 47
8.3 how to troubleshoot door alarms (door switch fitted) 48
8.4 how to troubleshoot door alarms (no door switch fitted) 48
8.5 how to troubleshoot motion sensor alarms 49
8.6 how to troubleshoot refrigeration system failure (rSF)alarms 50
8.7 how to troubleshoot temperature sensor alarms 50
8.8 how to troubleshoot problems with freeze-up protection (888) 51
8.9 how to troubleshoot not cooling problems 52
9 elstat parameter loader 53
9.1 what are the XML files? 53
9.2 what are checksums? 54
9.3 parameter programming accessories 54
ems55advanced and ems55Radvanced / General Use
3 of 84
To Next Page
Loading...
Need help?
General
