Step Action Display
20 Press the Defrost button
21 Place your hand about 300mmfrom the motion sensor
22 Move your hand from left to right.
23 Check for the following:
The display count increments for each detected movement.
The motion LED flashes for each detected movement.
24
Press the Menu button and the Defrost button
together
The test routine ends
4.9 How to view the last three alarms (FLt)
It is possible to view the last alarms and understand problems that have occurred with the EMS con-
troller.
Step Action Display
1 Press and holdthe Setbutton
2 The EMS display shows:
3 Enter the appropriate passwordto access the menu
4 The EMS display shows:
5
Press the Down button andscrollto FLt
6 The EMS display shows:
7 Press the Setbutton to select
27 of 86
27 February 2014
To Next Page
Loading...
Need help?
General
