Elster Instromet 2000 - Input 2 Board 4 Wire PRT Link Settings; Output Board Link Settings

Model 2000 Flow Computer Instruction Manual
4.0 MAINTENANCE
Model 2000 issue 21 Page No
66
4.5. INPUT 2 BOARD 4 WIRE PRT LINK SETTINGS
Link No. Function Factory setting Notes
1 HF Input 1 Resistor bypass OMIT
2 HF Input 1 0V 24 Connection OMIT
3 HF Input 2 Resistor bypass OMIT
4 HF Input 2 0V 24 Connection OMIT
5 Status Input 1 Resistor bypass OMIT
6 Status Input 1 0V 24 Connection OMIT
7 Status Input 2 Resistor bypass OMIT
8 Status Input 2 0V 24 Connection OMIT
9 Status Input 3 Resistor bypass OMIT
10 Status Input 3 0V 24 Connection OMIT
11 0VD to 0VA FIT No customer option
12 HART Loop 1 0V FIT No customer option
13 HART Loop 2 0V FIT No customer option
14 +12V Bypass link FIT No customer option
15 -12V Bypass link FIT No customer option
16 (1, 2) 4 Wire PRT FIT No customer option
16 (2, 3) Prover Output OMIT No customer option
See figure 28 for the location of the links.
4.6. OUTPUT BOARD LINK SETTINGS
Output No. Link No. 0-24mA 0-20mA 4-20mA Factory setting
O/P1 1 OMIT FIT A FIT B B
O/P2 2 OMIT FIT A FIT B B
O/P3 3 OMIT FIT A FIT B B
O/P4 4 OMIT FIT A FIT B B
See figure 13 for the location of the links.