Instruction
Manual
esd NX30
esd NX30.1
ESD Simulator
Electrostatic discharges either from a human body to any other
part or between two different objects can cause persistent dis-
turbances or even destruction to sensitive electronics or con-
trols. esd NX30 is an ESD tester to simulate ESD pulses at
higher voltages up to 30 kV in both air and contact discharge
mode. It therefore satisfiers requirements exceeding the
EN/IEC 61000-4-2 test levels and complies to automotive test
applications.
To Next Page
Need help?
General
