Ematic Ebook Reader - How to Transmit Data; How to Charge Your Ebook Reader

Ebook Reader User Manual
7
How to Transmit Data:
 Connect the Ebook Reader to a PC by the USB cable provided with
your device. You can now copy music, video, and document files to
your PC’s hard drive(s) or to other storage devices hooked up to your
PC. Conversely, you can copy music, video, and document files from
your PC (or storage devices) to your Ebook Reader.
 For the Windows operating system, open Windows Explorer, and
click/drag between files listed under the Ebook Reader drive and
other drives that contain music, video and documents.
 Safely detach the Ebook Reader from the USB cable and take your
files with you wherever you go!
How to Charge Your Ebook Reader:
Charge by Computer:
 Connect the Ebook Reader to a PC by the USB cable provided with
your device. (An on-screen icon will indicate a good connection.)
 Keep the unit connected to the PC in order to charge.
To Remove from Computer:
 Double-click the icon “Safely Remove Hardware” found on the lower
right-hand side of PC to remove the device. (Don’t pull out the USB
cable until you see that icon.)
Charge by Adapter:
 Plug the Ebook Reader into the adapter provided with your device.
 Charge from an electrical outlet.
Special note: Any Ebook Reader adapter must meet the following
requirements, or damage will occur – Input: AC110V 240V 50/60Hz;
Max:150mA / Output: DC5.0 5.5V 1000mA(USB) 1500mA(DC)