embrace Wave+ - The Embrace WAVE+ Blood Glucose Meter

9
Blood Glucose Monitoring System
The Embrace WAVE+ Blood Glucose Meter
TEST STRIP PORT
This is where you insert the test strip and the meter will turn on automatically.
METER DISPLAY
Shows your blood glucose test results, memory values, averages, and other messages.
ENTER (
) and (▲/▼) BUTTONS
Press and hold Enter (
) for 2 seconds to turn on or off the meter, or press Enter ( ) to
enter setup mode when not testing.
Press “▲” or “▼” to enter control mode with test strip inserted, during meter setup, or to
navigate the stored test values and averages.
TEST STRIP PORT
(▲/▼) BUTTONS
ENTER ( )
METER DISPLAY
®