EasyManua.ls Logo

embrace Wave+ - The Embrace WAVE Blood Glucose Test Strips

embrace Wave+
160 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
Blood Glucose Monitoring System
The Embrace WAVE Blood Glucose Test Strips
The Embrace
®
WAVE Blood Glucose Test Strip is a glucose specic, biosensor-based test
strip that can test glucose in capillary whole blood in as quickly as 5 seconds and requires
very small blood sample. The test result is plasma referenced for easy comparison to lab
results. The test strip has under-ll detection to alert you when there is not enough blood
to perform a test, so you can be assured that every reading you get is an accurate and
meaningful result.
IMPORTANT:
The Embrace
®
WAVE Blood Glucose Test Strip is sensitive to moisture and light. For vial
test strip, it is important to close the vial cap of the test strip bottle tightly after each
use. DO NOT leave any test strips outside the bottle while not in use.
For Foil-wrapped test strips, do not open the foil wrapping until performing the test.
DO NOT reuse test strips. Test strips are for single use only.
Carefully discard used test strips and lancets in proper waste containers.
Be sure to use only the Embrace
®
WAVE Blood Glucose Test Strip with the Embrace
®
WAVE+ Blood Glucose Meter. Other brands of test strips will not work with the meter.
Contact Points
Insert this end to the test
strip port on the meter
Sampling End
Apply blood or control solution
here
®

Table of Contents

Related product manuals