10 EMC VNX5500 Parts Location Guide
Disk processor enclosure (DPE)
Figure 5 Example of the DPE 3U, 15 (3.5-inch) disk drive (front view)
Note: Figure 5 is for illustrative purposes only. The front of the disk modules may be a little
different than the ones in your particular cabinet.
Table 2 is an example of the parts available for the 3U, 15 (3.5-inch) DPE and lists the part
number label location, part number, description, and whether it is a FRU or CRU.
Due to the extensive variety of disk module types, Table 2 only lists two disk types. EMC
recommends that you refer to the latest
EMC VNX5500, VNX5700, and VNX7500 Series
Storage Systems Disk and OE Matrix
Guide
to ensure that you have the correct part for
your configuration.
Part Number Label
VNX-000607
Table 2 DPE 3U, 15 (3.5-inch) disk module part numbers
Part number label
location (Figure 5) Part number Description (see note) FRU CRU
005049175 300 GB, 6 Gb/s SAS, 10k rpm
005049249 600 GB, 6 Gb/s SAS, 15k rpm
Note: The description field describes the disk module type, capacity, drive type, and spindle
speed (rpm).
To Next Page
Loading...
