EMC VNX5500 - System Component Descriptions; VNX5500 Front View Components

12 EMC VNX5500 Parts Location Guide
Disk processor enclosure (DPE)
Rear view
Figure 7 shows a 3U disk processor enclosure (DPE) with two storage processors (SP A
and B).
Figure 7 Example of a 3U DPE chassis with two SPs (A and B) and two I/O modules
Table 4 lists the part number label location, part number, description, and whether it is a
FRU or CRU.
X4
2
3
4
5
6Gb
SAS
8Gb
bre
1
0 X4
6Gb SAS
B
X4
2
3
4
5
6Gb
SAS
8Gb
bre
1
0 X4
6Gb SAS
A
2
31
4
SP B
VNX-000614
SP A
0123
PART NUMBER
REV A09 A
0
123
PART NUMBER
REV A09 A
0123
PART NUMBER
REV A09 A
0
123
PART NUMBER
REV A09 A
Table 4 DPE chassis, SP, management module, and I/O module part numbers
Part number label
location (Figure 7) Part number Description FRU CRU
1 100-562-503
100-563-138
3U, 15 disk drive chassis and
midplane
3U, 25 disk drive chassis and
midplane




2 071-000-529 1U AC/DC, 875W, dual power
supply (for closer view, see Figure 8
on page 13)

3 303-092-102B Four-port 8-Gb/s FC (2/4/8 Gb/s) 
303-141-100A
1
Four-port 1-Gb/s copper iSCSI I/O
module

303-081-105B
2
Two-port 10-Gb/s optical with iSCSI
protocol I/O module

303-142-100A
3
Two-port 10-Gb/s FCoE I/O module 
303-164-104D-01
4
Two-port 10-Gb/s RJ-45 Base-T
iSCSI/IP
