22. BLIND HEMMING
BUTTON HOLER ZIG ZAG WIDTH
wW
WW
M
0 25
12
PER INC
Fig. 41
1. Set Buttonhole dial (B) at "M" Position
2. Set zig zag dial (A)at #5.
3. Insert NO. 10 cam.
4. Set stitch length dial (C)at #25. Prepare the garment in the same manner
as for hand hemming.
B C D COMPLETED
Fig. 42
A. If hem with folded edge is used, make first fold ?" deep.
B. Turn hem the depth desired and baste ?" from upper edge. Press in place.
C. Fold hem back toward right side of garment leaving ?" extended.
D. Place material under presser foot, with top folded edge to the left of the needle.
20
To Next Page
Loading...