EMDEKO LT-72 - Cloth Guide; Zipper Foot

B. CLOTH GUIDE
Attach cloth guide to the bed of the
machine (See Fig. 49). The cloth guide
will enable you to make a straight stitch
at a uniform distance from the seam.
The cloth guide is adjustable, making it
possible to make a straight stitch at va-
rious distances from the seam.
C. ZIPPER FOOT
Your machine is equipped with an
adjustable zipper foot. Set the zipper
foot on the left side as shown in Fig.
50. This will allow you to sew on the
left side of zipper without danger of da-
maging the zipper or the needle. To
sew on the right side of the zipper, ad-
just the zipper foot to the right side by
loosening the screw located on the back
of the zipper foot.
NOTE: When using the zipper foot
always sew with a straight stitch.
CAUTION: Be sure to make the following arrangements.
1. Set zig zag dial at " : "
2. Set Buttonhole Dial at "M "
Fig. 49
Fig. 50
24