26. APPLIQUEING
1. Set Button hole Dial at "M"
2. Set the stitch length dial at "25".
3. Adjust the machine to narrow zig
zag stitch. Baste material on to the
article, then sew around the edges of
the material.
Fig. 46
27. HOW TO USE PRESSER FEET
Your machine is equipped with various specialized feet which will enable you to
do particular jobs with greater efficiency and obtain better results. Whenever you
attach a new foot to the presser bar, make sure you tighten the screw securely with
a screw driver.
A. PRESSER FOOT FOR STRAIGHT SEWING
In case of straight stitches, to use a presser foot for straight sewing.
1. To set the presser foot by releasing its set screw.
2. To set Buttonhole Dial at "M" and zig zag dial at " :"
Fig. 47
Fig. 48
23
To Next Page
Loading...