20. BUTTONHOLE SEWING
Buttonholes can be made fully by turning the buttonhole dial (B).
1. Change the regular presser foot to the buttonhole foot.
2. Set the stitch length dial (C) at B. H
3. Set the zig zag dial (A) at #5
BUTTON HOLER ZIGZAG WIDTH
wW
A
C ?
STITCH
Fig. 37
IMPORTANT:
MARK BUTTONHOLE LENGTH ON FABRIC AS
PER ILLUSTRATION BELOW.
- - Marking Line
Buttonhole foot
(plastic materials)
Cutting Space
- - - Marking Line
Fig. 38
When making buttonholes in very thin material, it is advisable to place a sheet of news-
paper or any other thin paper underneath the material. This will keep your work from
gathering.
When elastic material like knit fabric is sewn, push the built-in darner half-down. (See
page 11-Fig. 26)
17
To Next Page
Loading...