Emed ES120 - ES120 Technical Specifications

ES120 OPERATION MANUAL
IU ES120 2009-03-01 ENG.3.0
4. Technical data for the ES120 system
Table 1 shows the technical data for the electrosurgical system ES120.
SUPPLY
Supply voltage 230 V ±10% 50Hz
Rated power input 200 W
SAFETY CONDITIONS
Fire protection:
Class I
Type CF
Low-frequency leakage currents acc. IEC 601-1-1
High-frequency leakage currents acc. IEC 601-2-2
Generator working frequency 416 kHz
Defibrillation impulse resistance acc.EN 60601-1
System NEM Neutral electrode control.
AUTOTEST Automatic test of the
electrosurgical unit and the
instrumentation after
turning on power supply.
OVERLOAD Overloading protection.
POWER OUTPUT IN MONOPOLAR CIRCUIT
Pure cut 120 W
Blended cut 80 W
Soft coagulation 80 W
Forced coagulation 80 W
POWER OUTPUT IN BIPOLAR CIRCUITON
Bipolar 80 W
GENERATOR DIMENSIONS
Length 350 mm
Width 240 mm
Height 100 mm
Weight 3 kg
T
able 1.
Technical data for the ES120 system.
REMARK
Technical specifications listed in the table may change as our products
develop
.
8