Emed ES120 - Look and Construction

ES120 OPERATION MANUAL
IU ES120 2009-03-01 ENG.3.0
6. Look and construction.
The system encasing is made of plastic and metal material without ventilation openings.
It is easy to keep the system clean, it can be cleaned with disinfectants.
On
the front wall
of the encasing there are
(Rys.3)
:
➢
the mains switch
(1)
,
➢
the sockets of :
•
the neutral electrode
(2)
,
•
monopolar electrode
(3)
,
•
bipolar electrode
(4)
,
➢
the selection push-buttons for operation types :
▪
pure cut
(K1)
,
▪
blended cut
(K2)
,
▪
soft coagulation
(K5)
,
▪
forced coagulation
(K6)
,
➢
the power control push-buttons :
▪
monopolar cutting - increase
(K4)
and decrease
(K3)
,
▪
monopolar colagulation - increase
(K8)
and decrease
(K7)
,
▪
bipolar coagulation – increase
(K11)
and decrease
(K10)
,
➢
work-mode buttons for the foot-operated switch :
▪
monopolar and bipolar output control
(K9)
,
➢
set power displays for :
▪
monopolar cutting
(D1)
,
▪
monopolar coagulation
(D2)
,
▪
biplar coagulation
(D3)
.
On
the back wall
of the encasing there are
(Rys.4)
:
➢
the socket of the footswitch
(5),
➢
additional grounding pin
(6)
,
➢
network fuse sockets ~250V/2A
(7)
,
➢
power cable sockets
(8)
.
11