What does it mean if my Emerson Gateway wireless device appears in the join failure list?
If a wireless device appears in the join failure list for your Emerson Gateway, re-enter the Network ID and Join Key into the device.
General| Manufacturer | Emerson |
|---|---|
| Model | 1410 |
| Power Supply | 24 VDC |
| Operating Temperature | -40°C to 70°C (-40°F to 158°F) |
| Communication Ports | Ethernet, Serial |
Instructions for wiring a 24 VDC power source to the Gateway terminals.
Steps to connect a PC/Laptop to the Gateway's primary Ethernet port.
Configuring IP address, subnet mask, and disabling proxies for PC connection.
Accessing and logging into the Gateway's web interface for initial setup.
Instructions for wiring the Gateway's Ethernet or Serial output to the host system.
How to verify gateway operation by accessing its web interface.
To Next Page
