Emerson 1410S - Establishing Initial Network Connection

Note
If the PC/laptop is from another network, record the current IP address and other
settings so the PC/laptop can be returned to the original network after the Gateway
has been configured.
6. Select the Use the following IP address button.
7. In the IP address field, enter 192.168.1.12 (DeltaV Ready enter 10.5.255.12).
8.
In the Subnet mask field, enter 255.255.255.0.
9. Select OK for both the Internet Protocol (TCP/IP) Properties window and the Local Area
Connection Properties window.
2.3.3 Windows 10
Procedure
1.
Select the network icon in the lower right corner.
2. Select the Network settings link.
Configuration Reference Manual
May 2020 00809-0600-4410
10 Emerson.com