6 Verify operations
Operation is verified through the web interface by opening a web browser
from any PC on the host system network and entering the Gateway IP
address or DHCP host name in the address bar. If the Gateway has been
connected and configured properly, the security alert will be displayed
followed by the log in screen. Thiswill need to be done for both networks.
Figure 6-1: Gateway Log In Screen
The Gateway is now ready to be integrated into the host system. Ensure the
field devices to be used with each network have the Network ID and Join Key
that is on the Gateway (found on the Network Setting page). Once the field
devices are powered, they will appear on the wireless network and
communications can be verified under the Explore tab using the web
interface. The time needed for the network to form will depend on the
number of devices.
Quick Start Guide March 2020
20 Emerson.com
To Next Page
Loading...
