Emerson 1410S - Mounting the Emerson 1410 S2 Gateway

3.4 Mounting the Emerson 1410S2 Gateway
Find a location where the Gateway has convenient access to the host system network
(process control network).
3.4.1 Pipe mount
Pipe mount
The following hardware and tools are needed to mount the Gateway to a 2-in. pipe:
• Two 5/16-in. u-bolts (supplied with Gateway)
• 2-in. mounting pipe
• ½-in. socket-head wrench
Figure 3-1: Pipe Mount
3.4.2 Bracket mount
The following hardware and tools are needed to mount the Gateway to a support bracket:
Prerequisites
• Four 15/16-in. bolts
• Mounting support bracket
• ⅜-in. drill
• ½ -in. socket-head wrench
Mount the Gateway using the following procedure:
Reference Manual Installing the Gateway
00809-0600-4410 May 2020
Emerson 1410S/781S 23