EasyManua.ls Logo

Emerson 1410S - Gateway Replacement

Emerson 1410S
134 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications
Emerson Wireless 1410S Gateway
Functional specifications
Power
Intrinsically Safe Output Option A: 24 VDC
Intrinsically Safe Output Option B: 10.5-30 VDC
For best results, use a high quality industrial galvanically isolated power supply.
Current draw: Intrinsically
Safe Output Option A
Operating current draw is based on 7 Watts power consumption.
Current draw: Intrinsically
Safe Output Option B
Operating current draw is based on 5 Watts power consumption.
At start-up, the power supply must be capable of momentarily sourcing at least twice the
operating current indicated in the figure below. The Gateway may draw significantly more
current momentarily at start-up if not limited by the power supply.
Power over Ethernet (PoE)
Gateway supports IEEE 802.11 PoE as a Powered Device (PD) on either port.
Environmental
Operating temperature range:
Intrinsically Safe Output Option A: -40 to 149 °F (-40 to 65 °C)
Intrinsically Safe Output Option B: -40 to 149 °F (-40 to 65 °C)
Operating humidity range
0 to 99 percent relative humidity
Antenna options
See Wireless antenna options.
Performance specifications
EMC performance
Meet all industrial environment requirements of EN61326. Maximum deviation less than one percent span
during EMC disturbance.
Note
During surge event, device may exceed maximum EMC deviation limit or reset; however, device will self-recover and return to
normal operation within specified start-up time. For best results, use a high quality industrial galvanically isolated power supply.
Vibration effect
No effect when tested per the requirements of IEC60770-1 (1999):
High vibration level - field or pipeline (10 to 60 Hz 0.21 mm displacement peak amplitude/60 to 2000Hz 2g)
Physical specifications
Weight
2.76 lb (1.25 kg)
Housing size
6.25 in. x 8.8 in. x 2.5 in. (15.9 cm. x 22.4 cm. x 6.4 cm.)
Housing
Low-copper aluminum
Paint
Polyurethane
Mounting style
Pole mount
Network specifications
Self-organizing IEC 62591(WirelessHART
®
)
2.4 to 2.5 GHz DSSS
Maximum size for each WirelessHART network
Up to 200 devices
Capacity load
200 wireless devices at 8 seconds
Emerson Wireless 1410S April 2020
10 Emerson.com

Table of Contents

Other manuals for Emerson 1410S

Related product manuals