4.1.2 Bracket mount
The following hardware and tools are needed to mount the Gateway to a
support bracket:
Prerequisites
• Four 15/16-in. bolts
• Mounting support bracket
• ⅜-in. drill
• ½ -in. socket-head wrench
Mount the Gateway using the following procedure:
Procedure
1.
Drill four 3/8-in. (9,525 mm) holes spaced 3.06-in. (77 mm) apart
horizontally and 11.15-in. (283 mm) apart vertically in the support
bracket, corresponding with the holes on the Gateway mounting
bracket.
2. Using a 1/2-in. socket-head wrench, attach the Gateway to the
support bracket with four 15/16-in. bolts.
Quick Start Guide March 2020
16 Emerson.com
To Next Page
Loading...
