Need help?Do you have a question about the Emerson 2202 and is the answer not in the manual?
General| Operating Temperature | -40 to 85°C (-40 to 185°F) |
|---|---|
| Product Type | Controller |
| Output Type | WirelessHART |
| Housing Material | Various (dependent on enclosure) |
| Mounting Type | Various (dependent on enclosure) |
Describes the procedure for saving user parameters to the drive's EEPROM.
Explains how to load the default parameter set into the drive's EEPROM.
Details the types of parameters (read-only, read/write) and their characteristics.
Provides a key to understand the coding attributes of parameters.
Explains how parameters can be used as sources or destinations for drive functions.
Details the procedure for navigating and modifying drive parameters via the keypad.
Explains the interface standards and necessary converters for serial communication.
Provides guidance on connecting drives for serial communication networks.
Details the Modbus RTU protocol implementation for Control Techniques products.
Describes the PLC ladder logic programming capability using SYPTLite software.
Overview of CTSoft software for commissioning and monitoring.
Lists the system requirements for installing and running CTSoft.
Details parameters related to speed reference selection, limits, and filters.
Describes parameters for controlling acceleration and deceleration ramps.
Covers parameters for speed sensing, thresholds, and frequency input/output.
Details parameters for managing motor current and related controls.
Explains parameters for motor control, including voltage and V/f settings.
Describes parameters for drive sequencing, logic, and clock functions.
Details parameters for configuring analog inputs and outputs.
Explains parameters for configuring digital inputs and outputs.
Covers parameters for programmable logic, motorized pot, and binary sum functions.
Details parameters for status monitoring and diagnostic information.
Provides parameters for general drive configuration and setup.
Explains parameters for threshold detection and variable selection logic.
Details the function for controlling an electro-mechanical brake via drive digital I/O.
Covers parameters for the Proportional-Integral-Derivative (PID) controller.
Describes parameters for configuring installed Solutions Modules.
Lists general-purpose parameters for application menu 1.
Lists general-purpose parameters for application menu 2.
Details parameters for configuring a second motor map.
To Next Page