Emerson 2403 User Manual

Advanced User Guide
Commander SK
AC variable speed drive for 3
phase induction motors from
0.25kW to 110kW, 0.33hp to
150hp
Part Number: 0472-0001-09
Issue: 9
www.controltechniques.com

Emerson 2403 Specifications

General

Brand	Emerson
Model	2403
Category	Controller
Language	English

Summary

Advanced User Guide

2 Parameter x.00

2.1 Saving Parameters

Procedure and details for saving drive parameters to EEPROM.

2.2 Loading Default Parameters

Information on loading default parameter sets into the drive.

4 Keypad and Display

4.1 Programming Keys

Explanation of the MODE, UP, and DOWN keys for drive operation.

4.2 Control Keys

Explanation of the START and STOP/RESET keys for drive control.

4.3 Selecting and Changing Parameters

Procedure for navigating and modifying parameter values using the keypad.

5 Serial Communications

5.1 Introduction

Overview of serial communication capabilities and protocols (RS485, Modbus RTU).

5.2 EIA232 to EIA485 Communications

Information on using converters for EIA232 to EIA485 communication.

5.3 Serial Communications Connections

Wiring and connection details for serial communications.

6 CT Modbus RTU

6.1 CT Modbus RTU Specification

Description of the Modbus RTU protocol adaptation for Control Techniques products.

6.1.1 MODBUS RTU Physical Layer

Attributes of the physical layer for Modbus RTU communication.

7 PLC Ladder Programming

PLC Ladder Programming and SYPTLite

Overview of using SYPTLite for developing PLC ladder logic programs.

8 CTSoft

Installing CTSoft

Steps for installing CTSoft from the provided CD.

Getting Started with CTSoft

10 Advanced Parameter Descriptions

10.1 Overview

Introduction to advanced parameter descriptions and menu structure.

10.2 Menu 1: Speed Reference Selection, Limits and Filters

10.3 Menu 2: Ramps

10.4 Menu 3: Speed Sensing Thresholds and Frequency Input/Output

10.5 Menu 4: Current Control

10.6 Menu 5: Motor Control

10.7 Menu 6: Drive Sequencer and Clock

10.8 Menu 7: Analog Inputs and Outputs

10.9 Menu 8: Digital Inputs and Outputs

10.10 Menu 9: Programmable Logic, Motorized Pot and Binary Sum

10.11 Menu 10: Status Logic and Diagnostic Information

10.12 Menu 11: General Drive Set-up

Drive Configuration Parameters

10.13 Menu 12: Programmable Threshold and Variable Selector

Brake Control Function

Details on controlling an electro-mechanical brake via drive digital I/O.

10.14 Menu 14: PID Controller

10.15 Menu 15: Solutions Module Set-up

Solutions Module ID

SM-I/O Lite and SM-I/O Timer Modules

Details on SM-I/O Lite and SM-I/O Timer modules and their I/O.