Emerson 2403 - Application Menu 1 Power-Down Saved Integer; Application Menu 1 Read-Only Integer; Application Menu 1 Read-Write Integer; Application Menu 1 Read-Write Bit

Menu 18 Introduction
Parameter
x.00
Parameter
description format
Keypad and
display
Serial
communications
CT Modbus
RTU
PLC Ladder
programming
CTSoft Menu 0
Advanced parameter
descriptions
186 Commander SK Advanced User Guide
www.controltechniques.com Issue Number: 9
Menu 18 contains parameter that do not affect the operation of the drive. These general purpose parameters are intended for use with fieldbus and
drive user programming. The read-write parameters in this menu can be saved in the drive.
18.01 Application menu 1 power-down saved integer
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
111
Range -32768 to 32767
Default 0
Update rate N/A
18.02 to 18.10 Application menu 1 read-only integer
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
1
Range -32768 to 32767
Default 0
Update rate N/A
18.11 to 18.30 Application menu 1 read-write integer
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
11
Range -32768 to 32767
Default 0
Update rate N/A
18.31 to 18.50 Application menu 1 read-write bit
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
111
Range OFF(0) or On(1)
Default OFF(0)
Update rate N/A