Need help?Do you have a question about the Emerson 2401 and is the answer not in the manual?
General| Series | 2400 |
|---|---|
| Display | LED |
| Input Type | Thermocouple, RTD |
| Control Output | Relay, SSR |
| Power Supply | 100-240 VAC, 24 VAC/VDC |
| Communication | RS-485 |
| Dimensions | 96 x 96 mm |
User-initiated saving of drive parameters to EEPROM.
Restoring factory default parameter settings for the drive.
Details parameters for setting speed references, limits, and filters.
Covers parameters related to acceleration and deceleration ramp settings.
Parameters for speed sensing, thresholds, and frequency I/O.
Parameters for managing motor current, limits, and thermal protection.
Parameters for motor control modes, autotune, and voltage/frequency characteristics.
Parameters for drive sequencing, stop modes, and logic functions.
Configuration for analog input scaling, mode, and output signals.
Configuration for digital inputs, outputs, and status relay.
Parameters for monitoring drive status, alarms, and trip codes.
Parameters for configuring and tuning the PID control loop.
To Next Page