Quick Installation Guide
00825-0100-4001, Rev BA
November 2002
Model 3051
© 2002 Rosemount Inc. All rights reserved. All marks property of owner.
Rosemount and the Rosemount logotype are a registered trademarks of Rosemount Inc.
IMPORTANT NOTICE
This installation guide provides basic guidelines for Rosemount® Model 3051
transmitters. It does not provide instructions for configuration, diagnostics,
maintenance, service, troubleshooting, Explosion-Proof, Flame-Proof, or
intrinsically safe (I.S.) installations.
Refer to the Model 3051 reference manual (document number
00809-0100-4001) for more instruction. This manual is also available
electronically on www.rosemount.com.
WARNING
Explosions could result in death or serious injury:
Installation of this transmitter in an explosive environment must be in
accordance with the appropriate local, national, and international standards,
codes, and practices. Please review the approvals section of the
Model 3051 reference manual for any restrictions associated with a safe
installation.
• Before connecting a HART-based communicator in an explosive
atmosphere, make sure the instruments in the loop are installed in
accordance with intrinsically safe or non-incendive field wiring practices.
• In an Explosion-Proof/Flame-Proof installation, do not remove the
transmitter covers when power is applied to the unit.
Process leaks may cause harm or result in death.
• Install and tighten process connectors before applying pressure.
Electrical shock can result in death or serious injury.
• Avoid contact with the leads and terminals. High voltage that may be
present on leads can cause electrical shock.
Rosemount Inc.
8200 Market Boulevard
Chanhassen, MN USA 55317
T (US) (800) 999-9307
T (Intnl) (952) 906-8888
Fax (952) 949-7001
Fisher-Rosemount
GmbH & Co.
Shipping Address:
Argelsrieder Feld 3
82234 Wessling
Germany
Tel 49 (8153) 9390
Fax 49
8153
939172
Emerson Process
Management Asia Pacific
Private Limited
1 Pandan Crescent
Singapore 128461
T (65) 6777 8211
F (65) 6777 0947/65 6777 0743
4001_RevBA.fm Page 2 Monday, November 25, 2002 2:27 PM
To Next Page
Loading...
