AMS 6500 for mounting in a 19 in. cabinet enclosureFigure 4-6:
Prerequisites
You need two people to lift the unit and place it on the mounting rails.
Procedure
1. Attach the cage nuts in the mounting rails.
2. Using the screws and finishing washers, fasten the system frame to the mounting
rails through the two oblong holes on each side of the frame.
Cage nuts and screws in the mounting railsFigure 4-7:
A. Cage nut
B. Screw
Enclosure mounting
20 MHM-97125-PBF-EN, R0
To Next Page
Loading...
